[. . . ] Hardware Installation Procedure
STEP 1:
INS-8005
Quick Installation Guide INS-8005/INS-8008
1. [. . . ] On the INS-8008, connect the grounding screw to the ground wire.
Grounding Screw
-1-
-2-
-3-
STEP 4: Connect the Ethernet (RJ-45) port to the networking device. See the LNK/ACT LED to confirm that the connection is established.
5. Wall-Mounted Mask of INS-8005 & INS-8008
STEP 1: The wall-mounted direction can be straight or horizontal. Cabling RJ-45
The RJ-45 ports on the INS-8005/INS-8008 support auto negotiation and auto MDI/MDI-X. Location
The INS-8005/INS-8008 can be placed on a desktop or horizontal surface, wall-mounted and Din-Railmounted. DIN-Rail-mounted with INS-8005
STEP 3: Mark the Xs on the wall at the appropriate place. [. . . ] VOLKTEK Corporation www. volktek. com support@volktek. com Ph: +886-2-8242-1000 Fax: +886-2-8242-3333 Distributor for France PREDATA © www. trade@predata. fr trade@predata. fr Ph: +33 (0) 326221414
Click
Mounting holes for INS-8005 and INS-8008
Mounting the Switch
Removing the Switch
DIN-Rail-mounted with INS-8008
1
Push
1
Push
Mounting bracket for INS-8008
2
Click
2
Click
1:1 drawing of INS-8005 and INS-8008
For INS-8008 please remove DIN-rail kit before mounting.
Mounting the Switch
Removing the Switch
-4-
-5-
-6-
6400-000007 [. . . ]